Craft Coating Mirror Advertising Paint For Stainless Steel Outside Advertising Signs

Product Description

Advertising paint sculpture craft coating mirror stainless steel outdoor advertising signs outdoor advertising signs

Product characteristics:No grinding, no primer, no baking, convenient construction, easy color matching, fast drying, strong adhesion, long weather resistance and process saving

Scope of application: advertising paint is used for advertising spray painting, advertising words, various LED light strips, indoor / outdoor advertising signs of advertising light boxes, advertising signs, etc

Multi purpose advertising logo paint: for galvanized plate, aluminum alloy, aluminum plate, stainless steel, mirror stainless steel plate, cold rolled steel, sheet iron, copper, acrylic plate, ABS plate and other advertising logo base materials, it is not necessary to spray single or two-component primer at all, and 2K advertising logo paint can be sprayed just by removing oil, wax and wipe the surface of the base materials

Construction mix ratio of bright light: Paint: solid: thin = 4:1:appropriate amount
Construction mix ratio of matte: Paint: solid: thin = 4:1:appropriate amount
Construction mix ratio of semi gloss: Paint: solid: thin = 3:1:appropriate amount

Spray two to three times, no baking, room temperature 20 degrees, self drying about 4 to 6 hours can be assembled, dry about 24 hours, bright color, excellent compliance, outdoor weathering time machine test results can reach three years. The third generation of multi-purpose advertising paint is not only used in advertising and logo industries, but also very suitable for spraying on machinery, electric vehicles and various hardware products.

No grinding
The multi-functional primer does not need to polish or spray primer on the base materials such as galvanized plate, aluminum alloy, aluminum plate, stainless steel, mirror stainless steel plate, cold rolled steel, sheet iron, copper, acrylic plate, ABS plate, etc. It adopts special imported raw materials, combined with advanced international production process, with good adhesion, and can guarantee the covering force and adhesion (such as the base materials) without primer There are oil stains on the surface, which need to be degreased).

Strong adhesion
It can be directly applied to dry and clean or degreased material surface, without special treatment, saving time and labor, greatly saving construction time and cost, improving efficiency, and the effect of adhesion is comparable to that of sprayed primer, ensuring that it will not fall off for 3 years, with high positive impact strength, except for force majeure.

Wide range of application
This product is applied to all kinds of materials in the advertising industry, such as galvanized plate, aluminum alloy, aluminum plate, stainless steel, mirror stainless steel plate, cold rolled steel, sheet iron, copper, acrylic plate, ABS plate and other base materials, with multi-functional effect to adapt to various materials, and color matching between color masterpieces according to demand.

Less odor
The paint is made of imported materials, green and environmental friendly, with mild smell, so as to reduce the harm to the construction personnel.

Base material treatment and construction requirements

1. The base material must be cleaned to ensure no oil, embroidery and dust. Pickling, phosphating or solvent cleaning with white electric oil can be used.

2. A layer of antirust primer shall be applied to special base materials first. It shall be noted that the strong solvent top coat shall not be applied with weak solvent primer, and the top coat shall be applied after the primer is dry, otherwise the bottom may be undercut. Better use our primer

3. The construction viscosity is generally 16-22 seconds (4 cups). Viscosity is too low and easy to hang, not easy to cover; high, flow adjustment, wrinkles, and even blisters and pockmarks.

4. The air pressure should be kept at 0.5p8-0.8pa to ensure the good atomization of the paint mist, so as to avoid the occurrence of oil discharge and color floating, and the distance should be 25-30cm

5. When spraying, thin spraying shall be carried out for several times, and the last spraying thickness shall be carried out in the order of first up, then down, first secondary surface, then main visual surface, first inside and then outside. If the thickness is too thin, there is little film material and no leveling space, so that the film is rough and out of light

Note: the paint must be used up within 4 hours after curing