 |
Transparent Plastic Automotive Primer Paint PP Material Deep Scratch Repair
Product Details:
| Place of Origin: | China |
| Brand Name: | Willis Paint |
| Model Number: | TGM-601 |
Payment & Shipping Terms:
| Minimum Order Quantity: | ≥200 Liters |
|---|---|
| Price: | Negotiation |
| Packaging Details: | 1L * 15 tins / ctn , 4L * 6 tins / ctn . We can supply different carton size to meet your demand . |
| Delivery Time: | 18000 Cartons Monthly production |
| Payment Terms: | Visa, Paypal, T/T, Western Union, MoneyGram |
| Supply Ability: | 10-15 days from the date of order confirmation |
|
Detail Information |
|||
| Features: | Excellent Fullness, Good Leveling, Fast Dry Etc. | Other Names: | Plastic Primer |
|---|---|---|---|
| Color: | Transparent | Application Method: | Spray |
| State: | Liquid Coating | Sample: | Free |
| MOQ: | 200L | Shelf Life: | 2 Years In Sealed Environment |
| High Light: | automotive epoxy paint,car primer spray paint |
||
Product Description
Paint shop plastic primer PP material plastic primer deep scratch repair for automobile flash dry grit sandpaper
Product characteristics:
Plastic primer is a kind of fast drying single component transparent primer used to enhance the adhesion between paint film and plastic common peg. The paint film is hard, anti-oxidation adhesion, excellent weather resistance and good film fullness
Purpose:Spray on plastic surface of automobile bumper to enhance adhesion between plastic and paint.
| Code-name | Product name | Specification | packing specifications | Application and characteristics |
| TGM-600 | Interface varnish | 1L | 15cans/piece | Small area repair when the new spray paint is not dry before the surface, at the new and old paint interface 5-10 cm range of rapid light spray, leaves no traces of the interface. |
| TGM-601 | Plastic primer | 1L | 15cans/piece | Spray on plastic surface of automobile bumper to enhance adhesion between plastic and paint. |
| TGM-701 | Reinforced plastic primer | 1L | 15cans/piece | Whether it is impurity plastic or pure PP plastic, it has a good adhesion;spraying on the plastic surface of car bumper enhances the adhesion of plastic and paint. |
Construction method:
1. first use 400-600 grit sandpaper to polish, and then use degreaser to remove surface stains
2. spraying tools and air pressure: upper pot 1.2-1.4mm
Lower pot: 1.3-1.5mm
Traditional spray gun: 3-4 bar RP spray gun: 2.0-2.5 bar HVLP spray gun: 2.2 bar
3. spraying speed / film thickness: 2-3 layers.. 1-2um
Interval 5-10 minutes.. 20 degrees
Last interval: 10-15 minutes.. 20 degrees
4. the product does not need diluent. Please use it directly without spraying too thick
5. after spraying for 10-15 minutes, apply primer vigorously. Prevent dry
6. the unopened can be stored for about 5 years. After opening, the unopened can be stored for about 2 years
| Matters needing attention |
Make sure the primer is dry when spraying the top coat.
Pay attention to the cleanliness of the environment on the spraying site.
The unused paint and diluent shall be sealed.
Coating personnel shall wear labor protection appliances and pay attention to occupational health.
Strengthen ventilation, pay attention to fire prevention and put an end to fire sources.
During storage and transportation, it shall comply with relevant regulations, avoid sun and rain, isolate fire source and keep away from heat source.
|
