Coffee Finish 2K Solid Paint For Automobile / Advertising Mark OEM / ODM Accepted
|Place of Origin:||China|
|Brand Name:||Mt yishili|
|Model Number:||2K coffee color|
Payment & Shipping Terms:
|Minimum Order Quantity:||≥800 Liters|
|Packaging Details:||4 cans or 18 cans per box. We can customize the packing specifications according to your requirements|
|Delivery Time:||7-10 work day|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||30000 Cartons Monthly production|
|Brand Name:||FantasyColor, Shangfu, Mt Yishili||CAS No:||NO|
|Other Names:||2K Metal Paint||Color:||2K Coffee Color,Optional Colors|
|Type:||Colouring Agent||Substrate::||2k Intermidiate Primer|
|Ratio:||Paint: Hardener: Thinner = 2:1-0.8-1||Service:||OEM/ODM|
|Appearance:||Liquid Car Paint||Use:||Automobile Paint, Engineering Machinery Paint, Advertising Mark Paint, Antirust Paint, Metal Paint|
Automobile paint engineering machinery paint advertising mark paint antirust paint metal paint 2K coffee finish
1. Superior anti corrosion performance,physical and mechanical properties,chemical and weathering resistance,aging resistant performance to the paint film.
2. Good flexibility ,strong adhesion ,good impact resistance,good coverage power
3. Extremely Good fullness ,gloss, hardness,compatibility,leveling.Long lasting.
We use the high level of technology to product the advanced to produce car paint
Main product: all series of car paint / auto refinish - Polyester putty, 2K primer surfacer, Epoxy primer,1K basecoat(metallic color,pearl color,crystal pearl color,solor color)2K topcoat,Fast Drying/High film clearcoat, hardener, thinner, Matting Agent, Degreaser, Anti Silicon,Retarder Solvent,Quick Drier, Fixative, industrial paint etc.
|Drying Time||Temperature||Dust Free||Dry to Handle||Thorough Dry|
|1 hours@60℃||15minutes||1 hours||1hour|
|Health hazard||1. Eye contact: it can cause eye irritation, redness, tears and blurred vision
2. Inhalation: inhalation of steam may cause irritation of nose and respiratory tract, dizziness, weakness, fatigue, nausea and headache
3. Skin: may cause skin irritation, skin may cause intestinal irritation, nausea, vomiting, diarrhea
|First aid measures||1. Quickly leave the site to the fresh air place. Keep respiratory tract unobstructed. Like breathing suffering, give oxygen. If the breathing stops, carry out artificial respiration and seek medical treatment immediately
2. Take by mistake: drink enough warm water, do not induce vomiting for comatose person, and see a doctor immediately
3. Skin contact: take off the contaminated clothes, wipe the pollutants and wash the eyes with a large amount of flowing water and soapy water or special detergent. Contact: wash the eyes with flowing water for 15 seconds. If you still feel irritation, see a doctor.
Matters needing attention
1. It can be repainted in 24 hours
2. If ultra fast dry hardener agent is used, it can be recoated after 6 hours
The finish shall be at:
1. Spraying 24 hours later
2. Polish after 6 hours with ultra fast dry curing agent
1. Car body cleaning, checking
Please use degreaser produced byStrong Chemical"to clean the oil, waxand dirt on the substrate completely.and check the degree of damage andype of coatings
2. Andand modify the feather edge
Please use P80/P120/P180 dry sandingpaper to clean the paint film, the width offeather edge should not be lower than 3cm
3. Spray epoxy primer(if needed)
Epoxy primer is necessary to spray If themetal of damage area is already visibleafter it turns totally dry, scrape puttydirectly without sanding.
4. Scrape and sand putty
According to mixing ratio to add hardenerinto putty, mix and scrape, After it turnsdry, use P80/P120/P180 sanding papefor dry sanding, and use P240-P320sanding paper to sand previous paint film.
5. Dedusting, cleaning and covering
Please use the degreaser produced byStrong Chemical to clean the oil anddirt on car body And cover the area thatdoesn't need to be sprayed.
6. Spray 2K primer surfacer
According to mixing ratio to add hardenerand thinner to mix with primer surfacerspray 2-3 coats. the flash off time is 3-5minutes
7. Sanding 2K primer surfacer
Please use P320-P400 dry sandingpaper with sander to sand, wet sandingwith P600-P800 sanding paper manuallor edge
8. Cleaning, dedusting and covering
Please use the degreaser produced byStrong Chemical" to clean the oil anddirt on car body, and use cloth clean dustand ash. cover the area that doesnt needto be sprayed
9. Spray topcoat or basecoat
According to mixing ration to mix metallicor pear or solid color paint with hardenerand thinner Spray 2-3 coats, flash-off timeis 5-10 minutes. after 10-15 time to spray clear coat
According temperature to choose differentclearcoat and add proper hardener andthinner, spray 2 coats. the flash-off timeis 5-10 minutes uf needing to dissolve
11. Drying time of clearcoat
After spraying clearcoat. please wait for15-20 minutes, then make it dry by heator air drying
12. Polishing and waxing
Paint film dried by roast should be polishedand waxed after cooling. P1500-2000sanding paper could be used if needingto sand, then process overall polishing
Wet sand with P2000 grit sandpaperCompound and polish.
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges