Automotive clear coat paint protection automotive paint restoration high gloss clear coat automotive
1. Automotive primers are the first coatings applied directly to the surface of a surface treated component, which is the beginning of the entire coating. The design requires that the primer and the substrate should have good adhesion, and have good compatibility with the above middle coating or top coating.
2. It must also have good corrosion resistance, rust resistance, oil resistance, chemical resistance and water resistance.
Clear coat : 200 Portions
Supplementary Curing Agent: 100Portion
General Thinner: 10% Portions
According to the temperature and size of the repaired part, quick drying hardener, standard hardener, slow drying hardener and quick drying thinner, standard thinner and slow drying thinner can be selected.
Measuring the portions by scale and fully mixing the material in container before use
Clear coat : Can be stored for 3 years in its sealed original drums in proper storage conditions
Supplementary Curing Agent: Can be stored for 2 year in its sealed original drums in proper storage conditions.
Thinner: Can be stored for 2 years in its sealed original drums in proper storage conditions.
Fast drying, high hardness, smooth and smooth paint film, excellent cost performance, applicable to industrial paint for cars, truck, vans, etc
|Normal temperature 25℃/24 hours, baking 60℃ - 70℃/45 - 60 minutes.
Suitable for covering all kinds of middle and low-grade cars.
In order to ensure the spraying effect, please use (standard-drying, fast-drying, slow-drying) hardener and thinner series of products. When using, clear coat and hardener must be fully mixed; high solid clear coat can not be thick coated, otherwise it is easy to produce sagging; recommended spray 2 channels, can not be thick, otherwise affect the drying and hardness.
Remove wax oil and other impuritieswith deoiling detergent Examine andassess the location and extent of damage.
2. Grind damaged parts
Grinding with abrasive paper(#80# 2000). Dry grinding withsandpaper(#80, 120, 180) first.
3. Dust cleaning
Use a degreaser to remove greasefrom the workpiece.
4. Fill& Grind
Add thne hardener I proportionmix and fill the putty, Sanding(#80. 120, 180) after drying.
5. Clean &Grind
Clean the surface again, and thenfinely grind the filling to the leveof the paint.
6. Spray primer surfacer
Mix and spray primer according toproduct requirements, each layerneeds to be matte.
7.Grind primer surfacer
After the primer is dried, dry sandingpaper(3320-400)is used with atwo-way sander. Manual grindingon the edge(#600-800)
8. Clean & Wipe
Use a cleaner to clean the grease.and tack cloth to clear of dustand particles.
9. Spray 1K color paint
Add thinner as requiredspray2-3ayers, spray interval of 5-10nutes per layer.
10. Spray Varnish(clear coat)
Add hardener and thinner asrequired, spray two layerseach interval is 5-10 minutes.
11. Dry Bake
After the varnish is sprayed. it needbe allowed to stand for 10-15minutes can be baked or driednatur.
12. Waxing &Polish
Can be sanded with abrasivepaper(#2000)first if necessaryThen use related products forwaxing and polishing
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges