Payment & Shipping Terms:
|Brand Name:||FantasyColor, Shangfu, Mt Yishili||CAS No:||No|
|Model Number:||2K Acylic Clear Coat||Keywords:||Car Spray Paint|
|MOQ:||≥1000 Liters||Shelf Life:||5 Years, Two Year Before Being Opened, 2 Years In Original Container At 20°C, Cool And Dry Place At 25℃, 2 Years In Original Sealed Can|
car clear coat spray,
auto body clear coat
Clear Coat Characteristic:
1. Superior anti corrosion performance,physical and mechanical properties,chemical and weathering resistance,aging resistant performance to the paint film.
2. Good flexibility ,strong adhesion ,good impact resistance,good coverage power
3. Extremely Good fullness ,gloss, hardness,compatibility,leveling.Long lasting.
|Temperature& mixed||Temperature||Clear Coat||Activator/ Hardener||Thinner|
|Temperature& mixed||<15℃||C-9600 Clear Coat||C-300 Fast Dry Hardener||C-135 Fast Dry Thinner|
|Temperature& mixed||15-25℃||C-9600 Clear Coat||C-300 Standard Hardener||C-135 Standard Thinner|
|Temperature& mixed||25-35℃||C-9600 Clear Coat||C-300 Slow Dry Hardener||C-135 Slow Dry Thinner|
|Drying Time||Temperature||DUST FREE||TACK FREE||COMPLETE DRY|
|Drying Time||20℃||1h||2-3 hours||24h|
|Drying Time||60℃||5 minutes||10 minutes||60 minutes|
|2K varnish series|
|Code-name||Product name||Specification||packing specifications||Application and characteristics|
|C-9600||9600 high-gloss varnish (use with C-300 hardener agent )||1L||15 cans/piece||Suitable for ordinary cars|
|C-300||hardener||1L||15 cans/piece||suitable for C- series varnish and 2K masterbatch;a hardener agent for general car paint|
1. Car body cleaning, checking
Please use degreaser produced byStrong Chemical"to clean the oil, waxand dirt on the substrate completely.and check the degree of damage andype of coatings
2. Andand modify the feather edge
Please use P80/P120/P180 dry sandingpaper to clean the paint film, the width offeather edge should not be lower than 3cm
3. Spray epoxy primer(if needed)
Epoxy primer is necessary to spray If themetal of damage area is already visibleafter it turns totally dry, scrape puttydirectly without sanding.
4. Scrape and sand putty
According to mixing ratio to add hardenerinto putty, mix and scrape, After it turnsdry, use P80/P120/P180 sanding papefor dry sanding, and use P240-P320sanding paper to sand previous paint film.
5. Dedusting, cleaning and covering
Please use the degreaser produced byStrong Chemical to clean the oil anddirt on car body And cover the area thatdoesn't need to be sprayed.
6. Spray 2K primer surfacer
According to mixing ratio to add hardenerand thinner to mix with primer surfacerspray 2-3 coats. the flash off time is 3-5minutes
7. Sanding 2K primer surfacer
Please use P320-P400 dry sandingpaper with sander to sand, wet sandingwith P600-P800 sanding paper manuallor edge
8. Cleaning, dedusting and covering
Please use the degreaser produced byStrong Chemical" to clean the oil anddirt on car body, and use cloth clean dustand ash. cover the area that doesnt needto be sprayed
9. Spray topcoat or basecoat
According to mixing ration to mix metallicor pear or solid color paint with hardenerand thinner Spray 2-3 coats, flash-off timeis 5-10 minutes. after 10-15 time to spray clear coat
According temperature to choose differentclearcoat and add proper hardener andthinner, spray 2 coats. the flash-off timeis 5-10 minutes uf needing to dissolve
11. Drying time of clearcoat
After spraying clearcoat. please wait for15-20 minutes, then make it dry by heator air drying
12. Polishing and waxing
Paint film dried by roast should be polishedand waxed after cooling. P1500-2000sanding paper could be used if needingto sand, then process overall polishing
Wet sand with P2000 grit sandpaperCompound and polish.
Contact Person: Yuki
Tel: 0086 13725287956