Payment & Shipping Terms:
|Brand Name:||FantasyColor, Shangfu, Mt Yishili||Other Names:||Acrylic Paint,Automotive Acrylic Lacquer|
|Serviceable Time:||24 Hours,20 °C||Keywords:||Hydroxyl Acrylic Resin|
|Main Raw Material:||Acrylic||State:||Liquid Coating|
|Usage:||Car Paint, Appliance Paint, Furniture Paint, Road Marking Paint, Building Coating||Shelf Life:||5 Years, Two Year Before Being Opened, 2 Years In Original Container At 20°C, Cool And Dry Place At 25℃, 2 Years In Original Sealed Can|
car clear coat spray,
auto body clear coat
Refinish system for your car acrylic lacquer car auto paint for car repair /Transparent varnish /high gloss
Product Application: Mainly used in automotive paint and varnish.
1. Excellent for weather resistance.
2. Excellent for color development.
3. Excellent buildiness.
4. Dry fast.
5. High gloss.
6. With SGS report support.
|Temperature& mixed||Temperature||Clear Coat||Activator/ Hardener||Thinner|
|Temperature& mixed||<15℃||B-9800 Clear Coat||B-400 Fast Dry Hardener||B-136 Fast Dry Thinner|
|Temperature& mixed||15-25℃||B-9800 Clear Coat||B-400 Standard Hardener||B-136 Standard Thinner|
|Temperature& mixed||25-35℃||B-9800 Clear Coat||B-400 Slow Dry Hardener||B-136 Slow Dry Thinner|
|Drying Time||Temperature||DUST FREE||TACK FREE||COMPLETE DRY|
|Drying Time||20℃||1h||2-3 hours||24h|
|Drying Time||60℃||5 minutes||10 minutes||60 minutes
|2K varnish series|
|Code-name||Product name||Specification||packing specifications||Application and characteristics|
|B-9800||super hard high-gloss varnish (use with B-400 high concentration hardener agent)||1L||15 cans/piece||This product has high solid content, weather resistance, mild light and color retention. It is suitable for intermediate cars. Please use with b-400 hyperconcentrated hardener agent.|
|B-400||High concentration hardener||1L||15cans/piece||Suitable for C or B- series varnishes and 2K masterbatch, with higher hardness and better light retention than c-300 hardener agent.|
1. Car body cleaning, checking
Please use degreaser produced byStrong Chemical"to clean the oil, waxand dirt on the substrate completely.and check the degree of damage andype of coatings
2. Andand modify the feather edge
Please use P80/P120/P180 dry sandingpaper to clean the paint film, the width offeather edge should not be lower than 3cm
3. Spray epoxy primer(if needed)
Epoxy primer is necessary to spray If themetal of damage area is already visibleafter it turns totally dry, scrape puttydirectly without sanding.
4. Scrape and sand putty
According to mixing ratio to add hardenerinto putty, mix and scrape, After it turnsdry, use P80/P120/P180 sanding papefor dry sanding, and use P240-P320sanding paper to sand previous paint film.
5. Dedusting, cleaning and covering
Please use the degreaser produced byStrong Chemical to clean the oil anddirt on car body And cover the area thatdoesn't need to be sprayed.
6. Spray 2K primer surfacer
According to mixing ratio to add hardenerand thinner to mix with primer surfacerspray 2-3 coats. the flash off time is 3-5minutes
7. Sanding 2K primer surfacer
Please use P320-P400 dry sandingpaper with sander to sand, wet sandingwith P600-P800 sanding paper manuallor edge
8. Cleaning, dedusting and covering
Please use the degreaser produced byStrong Chemical" to clean the oil anddirt on car body, and use cloth clean dustand ash. cover the area that doesnt needto be sprayed
9. Spray topcoat or basecoat
According to mixing ration to mix metallicor pear or solid color paint with hardenerand thinner Spray 2-3 coats, flash-off timeis 5-10 minutes. after 10-15 time to spray clear coat
According temperature to choose differentclearcoat and add proper hardener andthinner, spray 2 coats. the flash-off timeis 5-10 minutes uf needing to dissolve
11. Drying time of clearcoat
After spraying clearcoat. please wait for15-20 minutes, then make it dry by heator air drying
12. Polishing and waxing
Paint film dried by roast should be polishedand waxed after cooling. P1500-2000sanding paper could be used if needingto sand, then process overall polishing
Wet sand with P2000 grit sandpaperCompound and polish.
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges
Contact Person: Yuki
Tel: 0086 13725287956