Suction Gun 2k Car Primer , Rust Prevention High Heat Resistant Automotive Epoxy Paint
Product Details:
Place of Origin: | China |
Brand Name: | tegumei |
Model Number: | TGM-409 |
Payment & Shipping Terms:
Minimum Order Quantity: | ≥300 Liters |
---|---|
Price: | Negotiation |
Packaging Details: | 4L + 1L set, 3 sets and 1 ctn |
Delivery Time: | 10-25 days from the date of order confirmation |
Payment Terms: | Visa, Paypal, T/T, Western Union, MoneyGram |
Supply Ability: | 20000 Cartons Monthly production |
Detail Information |
|||
Other Name: | CAR REFINISH | Color: | Grey,white,black,red |
---|---|---|---|
Characteristic: | Excellent Corrosion Protection, Excellent Adhesion On The Surface Of Steel, Aluminum And Zinc Plates | Application Method: | Spray |
Usage: | Metal Anticorrosive Coating | Mixture Ratio: | Epoxy Primer:epoxy Hardener:epoxy Thinner=4:1:1.5-2 |
Adaptive Environment: | No Fire Source, Use In A Well Ventilated Environment | Shelf Life: | 2 Years In Original Sealed Can At Cool And Dry Place At 20℃ |
High Light: | automotive epoxy paint,car primer spray paint |
Product Description
2k car primer suction gun rust prevention paint high heat resistance epoxy automotive paint
Epoxy primer | ||||
Code-name | Product name | Specification | packing specifications | Application and characteristics |
TGM-407 | White epoxy primer | 4L+1L | 3sets/piece | A primer for preventing corrosion of metals |
TGM-408 | Grey epoxy primer | 4L+1L | 3sets/piece | |
TGM-409 | High quality epoxy primer | 4L+1L | 3sets/piece | Stronger adhesion than ordinary epoxy primer, improve the anti-corrosion performance |
Epoxy primer | ||||
Applicable surface | Original coating aluminum, steel, stainless steel, zinc steel zinc surface, polyester board, plywood, atomic ash | |||
Volatilization time | the interval between two layers is 5-10 minutes | |||
Mix proportion | tgm-408 epoxy primer:4 | |||
Special curing agent for grey epoxy primer:1 | ||||
Epoxy thinner:1.5-2.0 | ||||
Service life | 20 ℃ 5 hours; 28 ℃ 4 hours;If the drying time exceeds 48 hours at 20 ℃, the iron red epoxy primer must be polished before spraying again | |||
Spraying equipment and air pressure | Gravity gun 1.2-1.5 mm 2-4 kg/cm Suction gun 1.4-1.8mm 3-5kg/cm | |||
Spray | 2-3 single coats | |||
Temperature | 10 ℃ | 20 ℃ | 60 ℃ | |
Non stick time | 60 minutes | 15 minutes | 5 minutes | |
Drying time before grinding | 16 hours | 12 hours | 50 minutes | |
Polish | Before spraying: p80 dry grinding or wet grinding After spraying: p280-p380 dry grinding or p400-p800 wet grinding |
Construction Process
1. Car body cleaning, checking
Please use degreaser produced byStrong Chemical"to clean the oil, waxand dirt on the substrate completely.and check the degree of damage andype of coatings
2. Andand modify the feather edge
Please use P80/P120/P180 dry sandingpaper to clean the paint film, the width offeather edge should not be lower than 3cm
3. Spray epoxy primer(if needed)
Epoxy primer is necessary to spray If themetal of damage area is already visibleafter it turns totally dry, scrape puttydirectly without sanding.
4. Scrape and sand putty
According to mixing ratio to add hardenerinto putty, mix and scrape, After it turnsdry, use P80/P120/P180 sanding papefor dry sanding, and use P240-P320sanding paper to sand previous paint film.
5. Dedusting, cleaning and covering
Please use the degreaser produced byStrong Chemical to clean the oil anddirt on car body And cover the area thatdoesn't need to be sprayed.
6. Spray 2K primer surfacer
According to mixing ratio to add hardenerand thinner to mix with primer surfacerspray 2-3 coats. the flash off time is 3-5minutes
7. Sanding 2K primer surfacer
Please use P320-P400 dry sandingpaper with sander to sand, wet sandingwith P600-P800 sanding paper manuallor edge
8. Cleaning, dedusting and covering
Please use the degreaser produced byStrong Chemical" to clean the oil anddirt on car body, and use cloth clean dustand ash. cover the area that doesnt needto be sprayed
9. Spray topcoat or basecoat
According to mixing ration to mix metallicor pear or solid color paint with hardenerand thinner Spray 2-3 coats, flash-off timeis 5-10 minutes. after 10-15 time to spray clear coat
10.Spray clearcoat
According temperature to choose differentclearcoat and add proper hardener andthinner, spray 2 coats. the flash-off timeis 5-10 minutes uf needing to dissolve
11. Drying time of clearcoat
After spraying clearcoat. please wait for15-20 minutes, then make it dry by heator air drying
12. Polishing and waxing
Paint film dried by roast should be polishedand waxed after cooling. P1500-2000sanding paper could be used if needingto sand, then process overall polishing
13. Polish
Wet sand with P2000 grit sandpaperCompound
Saft Precautions :
1. Keep container in a well ventilated and cool place
2. Keep away from fire
3. Avoid contact with eye and skin
4. Wear suitable gloves and eyes protection
5. Don't empty into drains
6. Against static discharges